Recirculating aquaculture systems: experiences, concepts, designs, and equipment
Share
Abstract
In a general sense, recirculating aquaculture system are designed tp approximate the fundamental aspects of natural system in order to support aquatic life. They may involve tank, pund, and other culture system where water is reused. In fish culture, the waste load mainly results from excreta and wasted feed, shich obviously cause water quality deterioration if unchecked. System management requires major attention to water quality, mainly dissolved oxygen, total ammonia nitrogen, nitrite, biochemical oxygen demand, and suspended solids.
The processes required and options for water treatment in recirculating systems have been clearly recognized. Among the critical processes are gas exchange (aeration and degasification), solids removal, and biological filtration or biofiltration. Solids removal is a solid-liquid separation process, and may onvolve garavity separation, filtration (screen, granual media, porous media), and flotation for finr organics and other solids (foam fractionation, protein skimming, froth flotation, and air stripping are other terms used). Biofiltration involves the use of living organisms to treat the wate. In tank recirculating system, it refers primarily to nitrification, which is the conversion of toxic ammonia and intermediate form nitrite to relatively harmless nitrate. In pund system and integrated system, biofiltration also includes the utilizationof aquatic plants and animals other than the culture species.
Other treatment processes include pH and alkalinity control, denitrification, and ultraviolet (UV) sterilization. Heaters and/ or chillersmay be proviede for trmperature control. While the processes and equipment are provided for specific purposes, thet are complementary, and a complex interrelationship exists in recirculating system. System design, components, and sizing criteria vary widely, and are mainly provided to comply with specific production needs, Recirculating systems for fish production are generally meant to be intensive. The paramount objectives is to design reliabel and cost-effective system.
Description
Excerpt from the Proceedings of the World Conference on Science and Technology, Manila, Philippines (13-15 September 2001).
Suggested Citation
delos Reyes Jr., A. A. (2002). Recirculating aquaculture systems: experiences, concepts, designs, and equipment. In L. G. Tansinsin, P. M. Halos, E. P. Sonido, P. G. Anglo, L. M. Rabago, F. B. Sevilla III, & F. T. dela Peña (Eds.), Harnessing Science and Technology to Meet the Global Challenge. Proceedings of the World Conference on Science and Technology, Manila, Philippines (13-15 September 2001) (pp. 65–81). Quezon City, Philippines: Philippine Association for the Advancement of Science (PhilAAS).
Type
Conference paperCollections
- Conference Proceedings [300]
Related items
Showing items related by title, author, creator and subject.
-
The Philippine aquaculture industry
(Aquaculture Department, Southeast Asian Fisheries Development Center, 1988)The aquaculture sector of the Philippine fishing industry registered the highest growth rate of 12.5% in 1977-1986. The contribution of aquaculture to the total fish production was equivalent to 24% in 1986 compared to only 85 in the early 1970's. In terms of quantity, the mariculture subsector registered the highest growth rate of 10.2% in 1982-1986, whereas in terms of value the brackishwater fishpond subsector showed the highest growth rate of 33%. Meanwhile, freshwater aquaculture production exhibited a negative growth rate due to reduction of activities in Laguna de Bay and the slow expansion in hectarage of the commercial freshwater fishponds. Research by several agencies concentrated heavily on the culture of milkfish (Chanos chanos), tilapia (Oreochromis niloticus), Chinese carps (Aristichthys nobilis and Hypophthalmichthys molitrix), tiger prawn (Penaeus monodon), and sea bass (Lates calcarifer). Innovations in seaweed, oyster, and mussel farming are also discussed. Research directions are presented to assure an ecologically sustainable growth in aquaculture with emphasis on countryside development. -
Family farms in Vietnam
(Aquaculture Department, Southeast Asian Fisheries Development Center, 1997) -
Nursery and grow-out operation and management of Penaeus monodon (Fabricius)
(Aquaculture Department, Southeast Asian Fisheries Development Center, 1988)The results of research on nursery and grow-out rearing of prawn conducted by the SEAFDEC Aquaculture Department for over a decade are reviewed. Different rearing facilities designed to accommodate hatchery-produced prawn fry are presented with corresponding data on growth, survival and production. Studies on stocking density, fertilization/natural food production, water management, feeds and feeding schemes and harvest/post-harvest handling are evaluated and viable technology identified. Diseases, pests and predators and other factors considered as production constraints are also mentioned. The success in hatchery operation for prawn coupled by the gradual emergence of nursery and grow-out rearing technology have triggered off a technology-dependent prawn industry. When SEAFDEC AQD was established in 1973, there were very few commercial prawn monoculture ventures in the country. Prawn pond production was mostly an incidental crop in milkfish culture. At present, various prawn grow-out techniques ranging from extensive, semi-intensive and intensive culture systems are in practice. SEAFDEC AQD focused its research on the extensive and semi-intensive culture systems which are within the reach of most farmers in contrast to the intensive system that is highly capital-intensive. There have been much work done in nursery and grow-out operations, but much remains to be done in research, among which are the development of nutritionally-efficient and low-cost feed, control of diseases, etc.
